DEWALT DCS391L1 20v Max

I have developed an appreciation for this saw. DEWALT DCS391L1 20 volt Max quite handy when I’m jobbing and doing small pick-up work. For just a few cuts or a little trim it is nice to have a light saw that I don’t have to lug an extension cord around. It is very far from replacing my worm drive, but it has found its own place in my truck in front of my worm drive. The time it saves me from chasing extension cords means the saw MAKES ME MONEY.

• Best Price for DEWALT DCS391L1

The DCS391L1 circular saw was a favorite of mine and features a lightweight magnesium shoe and ergonomic handle design. This new saw has a powerful 460 Max Watts Out (MWO) motor and is ideal for anyone who uses a circular saw and wants to avoid the long cord mess but not sacrifice the power.

With 3,700 RPMs, the DEWALT DCS391L1 is 10 percent more powerful than previous DEWALT 6½ inch cordless circular saws and with the 3.0 AH lithium-ion battery provides up to 57 percent more runtime its predecessors.

DEWALT DCS391L1

• Compact and ergonomic design that doesn’t compromise on power
• Powerful 460 max-watts-out and 3,700 RPM motor delivers power and speed
• Saw comes with 3-year limited warranty, 1-year free service contract, and 90-day money-back guarantee
• Battery comes with 3-year free service contract
• DCS391 6-1/2″ Circular Saw
• (1) 20V MAX* Lithium Ion 3.0 Ah Battery Pack
• Fast Charger
• 6-1/2″ Carbide-tipped Blade
• Kit Box

DEWALT DCS391L1 20-volt max 3.0 Ah lithium-ion circular saw kit comes equipped with patented technology and innovative features that make it ideal for professionals who have been tasked with framing, ripping, cross cutting, bevel cutting, and plunge cutting.

Incoming search terms:

• dcs391 6-1/2 circular saw

From the Manufacturer

Forrest’s blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it’s blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service (more…)

From the Manufacturer

CMT blade designers and technicians present the new Non-Ferrous Metal Saw Blade with the high quality performance you expect from CMT. Key features include high impact strength teeth made from special formulation carbide, a triple chip tooth configuration for longevity and a close tooth-to-body ratio – 0.122 tooth to 0.098 blade plate – gives better support to the tooth. The -7 degree hook angle provides controlled cutting for a smooth finish, without collapsing channel or storm window frames. Special gullet design allows for efficient chip evacuation. The CMT Non-Ferrous Metal blade is ideal for miter, radial and table saws and gives an optimum performance cutting aluminum, brass and other non-ferrous (more…)

From the Manufacturer

The ultimate in finish blades! CMT puts a 40 degree top tooth angle on its blades to provide flawless finishing on single and double laminates, melamine hard and soft woods – this means absolutely minimal chipping on double face material! The melamine and fine cut off is excellent on large miter saws for complex angle cuts where accuracy is a must.

(more…)

From the Manufacturer

The all-around cut off blade for hardwood, softwood, plywood and chip board. The alternate top bevel teeth, 5 degree hook angle and high tooth count make this blade perfect for use on table and miter saws. Alternatively the 10″ x 60 tooth thin kerf blade gives superior results when cutting expensive stock in addition to everyday hard and soft woods and composites. The thin kerf with a 15 degree hook angle makes this blade a good choice for less powerful saws. Not recommended for use on radial arm saws.

The all-around cut off blade for hardwood, softwood, plywood and chip board. The alternate top bevel teeth, 15° hook angle and high tooth count make this blade perfect for use on t (more…)

From the Manufacturer

14-Inch / 12-Inch point miter black saw, wood handle

(more…)

From the Manufacturer

The 10 x 60 Tooth CMT Cabinetshop Blade is sure to become a standard in the shop. The CMT Cabinetshop Blade, with alternating Triple Chip – Flat Top Grind and deeper gullet design, allows you to rip or crosscut with splinter free results in both hard and soft wood. Performs well also in laminates and plywood. The all-around performance of the CMT Cabinetshop Blade guarantees it will be an excellent value in a shop of any size.

10 degree hook angle
0.126″ kerf
0.087″ thick Plate

(more…)

From the Manufacturer

Original brand 12″ 100T C3 Carbide tooth circular saw blade. Thin-kerf, hard-body design is perfect for jobsite, woodworking or around-the-house woodcutting applications.

ORIGINAL TABLE AND MITER SAW BLADECarbide saw blade provides optimum performance and durability. No heat vents.

(more…)

From the Manufacturer

The 10 x 60 Tooth CMT Cabinetshop Blade is sure to become a standard in the shop. The CMT Cabinetshop Blade, with alternating Triple Chip – Flat Top Grind and deeper gullet design, allows you to rip or crosscut with splinter free results in both hard and soft wood. Performs well also in laminates and plywood. The all-around performance of the CMT Cabinetshop Blade guarantees it will be an excellent value in a shop of any size.

(more…)

Incoming search terms:

• compund miter saw 2011

From the Manufacturer

This 15″ finish blade from Hitachi is a perfect addition to the C15FB. Cut performance is maximized with Hitachi’s precision carbide teeth. Arbor size is 1″ and the tooth count is 80.

Kerf: .110″. Plate: .087″. Carbide Grade: C2 micrograin. Fine smooth finish in decorative moldings, veneer laminates, soft and hardwood cabinetry.

(more…)